SFF 2x5 155M Duplex LC Optical Transceiver

Features

Single 3. 3V Power supply and CML Logic Interface
Small Form Factor 2X5 pin Package,Duplex LC Transceiver
Operating data rate up to 155Mbps
850nm VCSEL Laser Transmitter：
Distance up to 2Km for Multi-Mode Optical Fiber
1310nm FP Laser Transmitter：
Distance up to 2Km for Multi-Mode Optical Fiber
1310nm DFB Laser Transmitter：
Distance up to 40km for Single-Mode Optical Fiber
1550nm DFB Laser Transmitter：
Distance up to 200km for Single-Mode Optical Fiber

Operating case temperature:

Applications

Ethernet Links
Fiber Channel LinksOther Optical Link

Ordering information

Table-1 Ordering information

Note 1: “x”=space, Standard: 0℃~+70℃; “x”=I, Industrial: -40℃~+85℃.
Note 2: “xx” is transmitter optical output close or open and Optical receiver Input indicated.
Transmitter optional as below:                              
B= Tx-BEN ( 0- close the laser 1- open the laser);D=Tx-DIS (0-open the laser 1-close the laser)
Receiver optional as below:
S=RX-SD （0-signal loss 1-signal valid);L=Rx-LOS (0- signal valid 1-signal loss)
So complete Part No. is GACF-1303-02DSNote 3: “MMF” stands for 50/125µm MMF；“SMF” stands for 9/125µm SMF

Recommend Circuit Schematic

Figure 4  Recommended Interface Circuit

Mechanical Specifications

Figure 5  Mechanical Specifications

Regulatory Information

Table 7-List of Regulatory Compliance

Notice

Gigac reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Gigac makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Revision History