语言选择: 中文English

PON optical mode

  • SFP GPON OLT super power 9-13dbm
SFP GPON OLT super power 9-13dbm

SFP GPON OLT super power 9-13dbm

1.Features
 Single fiber bi-directional data links asymmetric
 TX 2488Mbps/RX1244Mbps application
 1490nm continuous-mode DFB laser transmitter
 and 1310nm burst-mode APD-TIA receiver
 Small Form Factor Pluggable package
 with SC/UPC Connector
 Reset burst-mode receiver design support more
 than 15dB dynamic range
 0~70°C or -40~+85° Coperating case temperature for C-temp class
 Single 3.3V power supply
 Digital diagnostic monitoring interface
 Digital burst RSSI function to monitor the input optical power level
 LVPECL compatible data input/output interface
 LVTTL transmitter disable control
 LVTTL transmitter laser fault alarm
 LVTTL receiver Signal Detect (SD) indication
 Low EMI and excellent ESD protection
 Class I laser safety standard IEC-60825 compliant
 RoHS-6 compliance
2.Applications
 Gigabit-capable Passive Optical Networks (GPON) 20Km 13~28dB attenuation range.
3.General
The GPON OLT Transceiver module is designed for Gigabit Ethernet Passive Optical Network(GPON)
20km transmission. The module incorporates 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. The transmitter section uses a 1490nm DFB laser and an integrated laser driver which is designed to be class-1 eye safe under any single fault. The laser driver includes APC and temperature compensation functions, which are used for keeping the launch optical power and extinction ratio constant over temperature and aging. The receiver section uses an integrated APD and BM-preamplifier mounted together. The burst-mode receiver is restless and wide dynamic range over 24dB can be obtained under whole operating conditions. The module has the function that indicates receiver burst-power-detect signal. The receiver includes digitalized burst mode optical power monitoring function, which converses any of a received ONU optical power directly in digital, with a Trigger input from system. When rising edge of Trigger detected, the DDM processor starts a burst optical power conversion, the digital result is available via DDM interface after Burst Optical Power Conversion Time. Trigger pulse width should be more than Burst Optical Power Conversion Holding Time. An integrated WDM coupler can distinguish 1310nm input light from 1490nm output light. The metallic package guarantees excellent EMI and EMC characteristics.
4.Order Information
Table-1-Order Information
Part Number Data Rate (TX/RX) Wavelength (TX/RX) Index level Interface Temp. (1)
GGLS-4121-20 2.488G/1.244G 1490nm/1310nm B+ SC 0~+70℃
GGLS-4121-20I 2.488G/1.244G 1490nm/1310nm B+ SC -40~+85℃
GGLS-4121-20A 2.488G/1.244G 1490nm/1310nm C+ SC 0~+70℃
GGLS-4121-20AI 2.488G/1.244G 1490nm/1310nm C+ SC -40~+85℃
GGLS-4121-30 2.488G/1.244G 1490nm/1310nm C++ SC 0~+70℃
GGLS-4121-30I 2.488G/1.244G 1490nm/1310nm C++ SC -40~+85℃
SFP GPON OLT
Copyright © Gigac Technology Co., Ltd. DS-02034-A0 Page 2 of 8
GGLS-4121-30A 2.488G/1.244G 1490nm/1310nm C+++ SC 0~+70℃
GGLS-4121-30AI 2.488G/1.244G 1490nm/1310nm C+++ SC -40~+85℃
(1)The Temp is Operating Case Temperature Range.
上一个:GPON OLT C+++ 下一个:没有了

Navigation

Contact Us

Address: Zone 3-502,Haolang Science Park,Shuangliu, 610207 Chengdu,China

Tel. + 86-18602894430

Fax: 86-028-85124518-812
overseas@gigac.com


Hotline

关闭
用手机扫描二维码关闭
二维码